Gun Cleaning RodHaving a gun that does not perform well can be quite frustrating; small debris and dust stuck inside might be an underlying cause.

Gun hygiene is a very important factor that most people tend to take lightly. When a gun is not cleaned properly, you can face difficult situations such as shell jamming, less accuracy, and slow FPS.

To avoid getting into a situation like this, you must take care of your gun. So, today we are going to help you find the best gun cleaning rod. The tool you use to clean your gun can make a noticeable difference.

They work wonders by getting into the small and hard to reach areas and make you gun squeaky clean. You can use these cleaning rods with any kind of gun cleaning liquid you prefer.

 

 The Best Gun Cleaning Rod Reviews

With people becoming more and more aware of how important gun hygiene is, many brands are coming out with gun cleaning rods. How will you know which is best for you? To make it easier for you to take this decision, we have listed down below some of the cleaning rods that stand out in the crowd.

#1. Tipton 1-Piece Deluxe Cleaning Rod

Working the cleaning rod becomes a lot easier when you have a good handle to hold on to. The ergonomic handle that is featured in this one from Tipton helps you work and get into all those hard to reach areas without hurting your hands.Tipton-Deluxe-Carbon-Cleaning-Rod

Although a small detail, hole in the handle also allows you to store this cleaning tool with ease. No need to clear out space in your office or storage area; you can just hang this thing up anywhere for easy access.

Carbon fiber is one of the best materials that can be used to make cleaning rods. So this tool can be used to clean your gun barrel without causing any damage.

This also allows you to bend the tool as much as you want. The carbon fiber component easily goes back to the original shape and structure no matter how much the tool is bent.

This specific model is great for guns with tighter patches. You will be able to get out all dust and particles that are stuck inside quickly.

Highlighted Features:

Pros:

Cons:

 

#2. Dewey 1-Piece Cleaning Rod 

Single or one-piece cleaning rods have become quite popular nowadays. They are easier to use, less complicated, simple, and just get the job done easily.

Dewey has made this cleaning rod keeping all of these factors in mind. This one-piece rod is length coated and also made with male threads. This allows you to use the rod with any gun without needing a thread adapter.Dewey 1-Piece Cleaning Rod

The high-quality cleaning rod also has a small ball bearing on the top that can be used to spin and operate the tool as you like and need.

A ball bearing takes up less space and allows you to insert a larger length of the tool into your gun barrel compared to a cleaning rod with traditional handles. You might think that this ball bearing is too small for you to use to control the tool, but in reality, this ball is strong and thick enough to give you full control and comfort as well.

Highlighted Features:

Pros:

Cons:

 

#3. Hoppe’s Elite 1-Piece Cleaning Rod

As these tools are long and thin in the structure, losing shape or bending after a couple of uses is a normal thing you could expect to happen. But good quality gun cleaning rods are designed in a way to stay strong and never lose their shape no matter how vigorously you have used the tool or how regular.Hoppe's Elite 1-Piece Cleaning Rod

Hoppe’s Elite cleaning rod is one of these elite tools. No matter how many times you use this cleaning tool or how rough you use it, the cleaning rod holds the initial structure.

Made with an ergonomic handle, you can use this too with ease without getting sore hands. The handle is comfortable to hold but is quite sturdy and won’t break or detach from the rod.

Improvements in the design have included advance technology in this tool to help you clean better. There is no chance of you missing a spot when cleaning with this tool. To add to that, there are also two premium double ball bearings included in the cleaning rod.

Highlighted Features:

Pros:

Cons:

 

#4. Pro-Shot Gun Cleaning Rod

This cleaning rod from Pro-shot has been in the market for quite some time now and is loved by all. The kit includes the cleaning rod, handles, and also a holder for the cleaning patches. All you need to clean your pistol is provided to you in this set.Pro-Shot gun cleaning rod

Although carbon fiber has become the material of choice for cleaning rods, some of you might not prefer it. This metal cleaning rod will, therefore, be of great benefit to you. The structure is strong but causes no harm to the interior of your pistol. No need to worry about scratches and interior damage.

This tool is made to be able to swivel and move as you want to help you get into all those hard to reach areas. But no matter how much you bend this, you won’t see any permanent deformation. You can use this model for years without any wear.

A one-piece set like this one is simple and easy to use and also takes little to no space to store.

Highlighted Features:

Pros:

Cons:

 

#5. Allen 30″ Brass Rifle Cleaning Rod

Another option that you could go for if you do not want to purchase a carbon fiber cleaning rod is a brass rod. Out of all the materials that a cleaning rod can be made with brass is brass is a gentler option, right after carbon fiber.

If you are new to cleaning your gun, we highly recommend this as you can get the tool at a cheaper price, and also, the tool causes no damage to your gun no matter how rough you use it. So this three-piece brass rod set from Allen is something that beginners will love.Allen 30 Brass Rifle Cleaning Rod

Keep in mind you do have to use brass rods a bit more gently than you would a carbon fiber one. They can easily break and snap if you apply too much pressure.

This model fits most clean brushes and is 30 inches in length. You also get 8-32 threads in this version.

Available at a price like this, this brass cleaning tool is a must-have for everyone.

Highlighted Features:

Pros:

Cons:

 

Buying Guide for Gun Cleaning Rod

There are many options in the market when buying a cleaning rod for your gun. All of them have their features and specialties. Keeping all of these special features aside, some general factors apply to all kinds of cleaning rods to make them the best ones. These are also factors that you need to keep in mind before making your purchase.

When buying a cleaning rod, you want to make sure that the product is long enough to go through one end of the gun bearing and come out of the other. If a rod is too short in length, you won’t be able to get into all the nooks and crevices. You might have to reach in from both of the ends as well. This is too much work and is also ineffective.

Get to know what size your gun barrel is and make the purchase accordingly to get the best possible results.

There are lots of materials that you can choose from when it comes to a gun cleaning rod. Brass, steel, aluminum, steel cable, and carbon fiber are only a few of them.

Carbon fiber seems to be the most popular material for cleaning rods. This material does not cause any harm to your barrel. There are no chances of getting scratches. Carbon fiber is also an environment-friendly option.

Most companies are now trying to come up with one piece of designs for their cleaning rods. One-Piece design includes a straight rod with no more attached parts.

This makes the cleaning rod easier to use and less complicated. But this also means that you have to purchase different sized rods for all your different guns. A multiple piece gun cleaning rod can be adjusted to your preferred size. So if you only have one gun that you need to take care of, a single piece rod will be the best option.

This is the most important factor that needs to be considered after the rod length. If the rod that you have purchased is too thick, the product won’t even be able to get inside your gun barrel.

On the other hand, a cleaning rod that is too thin will take too much time to get the job done. You need to buy a cleaning rod that is of medium size for your gun so that your tool is cleaned thoroughly and properly.

 

Frequently Asked Questions

To clear out your confusion even further, here are some of the most common questions customers have when buying a cleaning rod for their gun.

Do I need to use a rod guide?

When using a cleaning rod for the first time or buying a rod from a new brand, we always recommend that you use the rod guide.

What does a cleaning rod do?

A cleaning rod goes deep into the barrel of your gun to clean out and dirt that has accumulated inside.

Which material is the best for cleaning rods?

Carbon fiber is now loved by all as a cleaning rod material.

What kinds of guns can I clean with a cleaning rod?

You can clean all sorts of guns with a cleaning rod that is labeled universal. Shorter and smaller rods can be used on rifles, pistols, or shotguns.

How long do I need to clean my gun?

As long as you don’t see any more dust inside. This usually takes just 2 minutes.

 

Final Verdict

Now that you know how helpful this tool is, we’re sure you can’t wait to get your hands on this product.

We’ve tried to mention all the details and the best products here to help you make the best choice. Hopefully, you’ll be able to choose the best gun cleaning rod and be happy with your purchase.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *