- 1 Types of Bullet Pullers
- 2 Top 4 Bullet Puller Reviews
- 2.1 #1. Hornady 050095 Cam Lock Bullet Puller
- 2.2 #2. RCBS Pow’r Pull Kit
- 2.3 #3. Lyman Magnum Inertia Bullet Puller
- 2.4 #4. Frankford Arsenal Quick-N-EZ Impact Bullet Puller
- 3 What Type of Bullet Puller Should You Buy ( Buying Guide )
- 4 Frequently Asked Questions
- 4.1 Why would I need a bullet puller?
- 4.2 What precautions do I need to take while working with a bullet puller?
- 4.3 What type of bullet puller is the least trouble to work with?
- 4.4 Is the bullet puller going to distort the bullet while getting it out?
- 4.5 Can I use the bullets after extracting them out of the rounds?
- 5 Final Verdict
Reloading could be a fun hobby if you’ve got the right tools to do it.
As such, you need to have a bullet puller in your ammunition kit.
These tools are typically very easy to use. But you do need to have the right equipment for the job.
We are going to discuss some of the good ones in the market. Our aim is to help you find the best bullet puller out there. Now, let’s get down to business and talk in detail.
Types of Bullet Pullers
There are about 4 types of bullets in the market. You will need to know what each one does. So here we go.
Bullet Pullers for Impact
If you need to use collets of different sizes, then impact bullet pullers will suit you best as they are very easy to install and replace collets with the cap that comes on the case.
You can use whichever collet you need. Then, there will be some rubber rings, which will go into the collet. You will need to put the ammo inside the collet so that the rubber holds it tight.
Then you have to use the hammer to hit on it. As the rubber holds the ammo, the hammer will hit the collet and cause the bullet to give way to pressure and loosen up.
You will also be able to use these to disassemble extra brass bits that get stuck while working the ammunition.
Inertia Bullet Pullers
First of all, these ones come at a higher price than the others. You have to put the loaded round of bullets inside the collet of your choice. Make sure that the rounded edge is towards the primer of the hammer.
Once the round is firmly put in place, tighten the cap very firmly for maximum retention to happen. Then smack the apparatus against a solid surface, to finally get the bullet to loosen up.
The collet crimps on the bullet and holds on to it, while you use impact energy to get the bullets off. This is the simple type of bullet puller you can get. So, if you are a beginner, this one is recommended for you.
Bullet Puller Kits
This is for the people who want the entire package of collets and hammers. They are made by a company called RCBS. If you have different types of pistols and rifles, then such kits will come in a lot of use.
Reloading Cam Lock Bullet Pullers
These suited for heavy-duty tasks. They harness the energy force from your pressing load and use that to pull out the bullets, which is very useful when working with serious weapons.
Top 4 Bullet Puller Reviews
There are some variations available in the market. But which one suits you? Below are some of the highly esteemed ones that are facing customer demand in the market. They are bound to come in handy to you as well.
#1. Hornady 050095 Cam Lock Bullet Puller
The advantage of this one is that it is really simple to use.
It’s just a cam lock bullet puller that relies on the pressing capacity of the load you are using.
The red handle that it has is of just the right thickness and the right length to assist a firm hold on it. This is one of the most comfortable aspects of using this bullet puller.
Collets do not come in the package, though. You will have to buy them separately.
Get the right size of the collet; use it to crimp on the bullet. Then adjust the clamp on to it, exert pressure, and watch your bullet come out effortlessly.
Please note that they are meant to be used with cartridges of rifles only. If you have a pistol, then this tool is not for you, unfortunately.
- Has a cam lock system
- Specially designed for rifles
- Comes with a handle that provides a very firm grip
- Requires the least amount of effort due to the mechanics installed
- Very simple and easy to use
- The handle is comfortable to hold
- Uses the force from the loading press itself
- Exerting pressure on it does not require much effort at all
- The set does not come with collets
- Cannot be used on pistol cartridges
#2. RCBS Pow’r Pull Kit
If you want quality, this is your stop. Well, and if you want glamour, then this is also your stop.
Not that appearance is a necessary aspect for any bullet puller to work efficiently, though.
However, we mention this because this tool has a gorgeous shiny, bright teal color that will just brighten up your mood.
Other than the looks, the functionality of this tool will also put you much to ease.
It comes from RCBS – a company that is leading at the top of the ammunition reloading market right now. This particular tool from the company is as resilient and durable as any other of their making.
This is a reloading bullet puller that comes with a chuck that has 3 jaws to crimp on the bullet that you are trying to get to loosen up.
It is a kinetic puller of the greatest build. After you put the bullet into the chuck, you will need to put the hammer in place and screw it on tightly.
Another great feature of this bullet puller is that it allows you to work with cartridges of three different sizes. So you will be able to use this with different pistols.
Using it is already simple, but it is further simplified by the user-friendly handle on the tool. Another useful aspect of this tool is that it is single-unit construction.
This means that you are not going to have to rely on screwing in other components of metal and plastic to get started with this one.
- Has a built-in chuck input system
- Works with cartridges of various sizes
- The most amazing looking bullet puller in the market
- Comes from a prestigious company that never disappoints
- Good value for money
- The build is of great quality
- Comes as a single-body construction
- Has a very comfortable and easy-to-use handle
- Allows work with shell holders of 3 different sizes
- Will last you for several years even if used on hundreds of rounds
- Does not come with a guide and is difficult to figure out
#3. Lyman Magnum Inertia Bullet Puller
This is also a very popular one from the market. It looks like any other bullet puller that relies on inertia, and its functions are quite straight-forward.
The application of the tool is quite simple. No extra hassle is required.
You just have to adjust the collet into place, clamp down the bullet with it. Then you need to screw it down firmly in place and get down to smacking. There will be no damage to your bullet.
Even your casing will be left completely as it went.
The best part is the design of the head, which will allow you to use it on various magnum sizes, going from the tiniest of the calibers to the very large ones you might need to work on.
This gives the tool great versatility. On top of that, you will be able to exercise necessary caution by using strips into the rounds that already been loaded. All proceedings with this tool are intended to be fast and quite effortless.
The handle is also of the perfect length. Very comfortable to hold, because the grip is soft and firm. Rest assured, you are going to be very fast and efficient with loading and reloading your rounds even with all the mistakes you make, as long as you have this bullet puller by your side.
- Faster loading and reloading
- Critical head design for efficient work
- Offers a clean and hassle-free experience
- Comes with a handle of just the right length and thickness
- Very easy to use
- The handle is very comfortable to hold
- Calibers of different magnums can be used
- Does not require much time to reload the rounds
- Will not cause any damage to the bullet or the case
- Not recommended for bullets with plastic tips
#4. Frankford Arsenal Quick-N-EZ Impact Bullet Puller
In this set, you are going to find one very good hammer, 4 o-rings to help you crimp on the bullet, and 3 differently sized collets that will give you greater versatility in function.
Because of the choice you get between multiple collet sizes, you will find that you are able to work this tool with bullets of any caliber.
This is an impact bullet puller, which works by holding the bullet firmly in place, as you use the hammer to repeatedly whack the whole apparatus onto a solid surface.
Well, you can already tell that this requires the tool to be very withstanding. And that is exactly what you can expect to get from this set. The quality is maintained by using a combination of parts made of aluminum and high-strength plastic.
A result of this is that you will be able to exert the impact of very heavy forces on this tool, and not have it break apart. You will get to loosen up the bullets much faster and very smoothly by doing this.
Efficiency is one of the selling points of this company, and they do keep to their commitment.
- Runs on a cam lock system that you can rely on
- Made with a combination of aluminum and high-quality plastic
- Smooths up your workmanship skills with the highly efficient system
- A full kit that comes complete with o-rings and collets of different sizes
- Comes with collets of 3 different sizes
- Components are made of 2 different materials
- Great versatility with bullets of different calibers
- Works with pistols of any type of reloading styles
- Very easy to get rid of the bullets once they are clamped up
- You will be able to use on both rimmed and rimless bullets alike
- Be careful with the foam used to protect the bullet as it can absorb some of the powder
What Type of Bullet Puller Should You Buy ( Buying Guide )
Well, let us tell you that there are factors more important to consider than just the price of the bullet puller. Let’s discuss them here.
Bullet pullers need to be strong enough to pull out bullets that may get stuck in awkward angles. And even if that doesn’t happen, it will still need to be resilient enough to withstand the constant pressure of pulling out strongly bolted bullets, or pulling brass bits that get stuck while fixing or loading ammunition.
Make sure that the components of the bullet puller you get are each durable in their own way. Otherwise, if one part breaks or gets dented, the whole tool will be rendered useless.
Pulling happens mostly by the use of handles. If the handle on the bullet puller is not long or strong, then you will be greatly slowed down.
This becomes a big hassle when you are working with about hundreds of rounds of bullets consecutively. So make sure that the handle is ergonomic and that it does not tire you out too much.
The quality of the bullet puller and the design implemented on it is of crucial importance. If you have a poorly designed tool, you are going to damage the rounds when trying to insert them into the collet.
Now, one way to make sure that you are buying a good quality bullet puller is to get it from a brand that everyone trusts. You will easily be able to rely on the make of those pullers.
See if the bullet puller is compatible with the type of weapon and bullets you work with.
Try to get ones that work with both rimmed bullets and rimless bullets. They will be the best value for your money. Therefore, they will also have the most practical use.
Frequently Asked Questions
If you have any questions, we hope we have answered them below. In case of further confusion, please comment below, we’ll help you right away.
Why would I need a bullet puller?
To get bullets out of the rounds when you accidentally make a mistake while inserting them.
What precautions do I need to take while working with a bullet puller?
You need to wear protective eyewear, in case some bit breaks off and hits you right on the spot.
What type of bullet puller is the least trouble to work with?
Get impact bullet pullers if you are just starting out.
Is the bullet puller going to distort the bullet while getting it out?
Most pullers don’t. However, if you are using a bullet that is tipped with plastic, then some distortions might happen.
Can I use the bullets after extracting them out of the rounds?
As long as they are not damaged, you absolutely can.
Be careful when you are working with bullet pullers. The hammer whacks might not cause any harm to the bullets themselves but might harm your head if you aren’t careful. As for the bullet pullers themselves, try to get ones that work with both rimmed and rimless bullets.
We hope this article was helpful enough to find the best bullet puller. Best of luck on the shooting range!
Joseph Fox writes on a variety of topics ranging from reloading ammunition to gun cleaning. He has been featured on various publications like thetruthaboutguns, Sofrep & many more. Joseph is also the founder of Gunloading, where he reviews different types of reloading & firearm products available on the market.