Regardless of what purpose you are using your rifle for, the first necessity is to keep it in top working order, and this includes the rifle’s scope.
A long-range accuracy rifle scope is must-have equipment to ensure the rifle is set to the target, whether that’s a black bear or a whitetail deer.
Many hunters even keep camera glasses for the purpose of recording what they’re seeing while hunting with a single tap of the finger.
Adjusting the rifle scope and learning how to see through it are equally important, as both require some technical understanding.
For this reason, it’s crucial to learn how to sight in a rifle scope—especially if you’re a beginner.
Below is a practical guide for developing a better understanding of how to use a rifle scope.
Whether your rifle has pre-bored and tapped openings for scope bases or a scored rail framework, most present-day rifles are outfitted with a mounting framework for a specific degree. Particular kinds of extension rings fit only specific kinds of degree bases, so it’s important that these parts coordinate. For example, if your rifle has a Weaver and Picatinny rail framework, you will need to ensure that your degree mount and rings are an appropriate fit for your rifle style.
Fine-tuning the scope to find the ideal adjustment for your eyesight is crucial for sighting your rifle scope. Try to adjust your eyepiece to the point where you have a clear distant view of the image. It also helps to make sure the distance between your eye and the scope is far enough so that, upon firing a shot, the recoil doesn’t send the scope back far enough to make contact with your eye, which can cause serious injury. It’s known as “getting scoped.”
To ensure you’ll shoot properly, sight your rifle scope in a stable shooting position. You can adjust your rifle’s shooting position on a shooting bench, either with a mount or a bipod. Both can help you achieve the desired results. When you hold the rifle in its target position properly, the rifle mount can simultaneously reduce the recoil up to 95%. You can easily find rifle mounts available at different price ranges for specific designs and scope detections.
Many shooters never consider the alignment of the reticle when zeroing the scope. This is referred to as “reticle cant.” An inclined reticle is when the focus of your degree is not entirely adjusted to the ground slope and wind speed. This can make your shots hit right or left of the target objective—mainly while sighting in a goal at a distance of 250 yards or more.
Settling the angle is important, as it is a multi-step process. All you need to do is fix the targets at various distances, starting at 100 yards. For this purpose, you mostly need to have the rifle stable.
Most rifle degrees allow you to change the line of sight in ¼ MOA (minute of angle) increases. This equates to ¼ inch of development per click when sighting in at 100 yards. Most trackers utilize the 1/8 inch and ¼ inch MOA click esteem. To make the slugging effect move one inch or one MOA at 100 yards, you should turn the height, or the windage handle, four clicks. The click esteem moves by a ¼ inch for every 100-yard increment in the distance.
Fire three-shot groups and analyze where these groups have landed on the target. By doing this, you might discover that you either sighted in slightly high at 100 yards or shot dead center at 200 yards. It depends entirely on your MOA, which will allow you to adjust for targets at various points. Try out multiple distances and keep on repeating this step until you hit the grouped shots very near to the bullseye. When you are a master at it, you’ll be able to will hit targets that are even further away. While you’re shooting, make sure to factor in not only the rifle scope and distance to the target but also environmental variables, such as wind.
Sighting in a rifle scope is all about alignment and targeting the exact point. For this reason, minor things are important to consider. Good alignment and placement of your rifle will give you an accurate scope and make every shot precise.