The 4 Best Bullet Puller For Reloading 2020

best bullet pullerReloading activities could be a fun hobby if you’ve got the right tools to do it.

Otherwise, not only will you be unable to separate bullets from the case, but you also put yourself at risk should an accident happen.

They may not be as expensive as other reloading tools, but the bullet pullers will make those tasks way easier.

Here, we’ll be reviewing different picks to find the best bullet puller for you.

As you saw from the title, we’ve chosen four alternatives that delivered great results. They’re efficient, comfortable, and easy to use too. After getting one, you’ll quickly notice the improvement in your activities.

First, we’ll learn the different bullet puller types, and which one is the most suitable for you depending on what you need.


Types of Bullet Pullers

There are two types of bullet pullers worth considering. Their capacity to get bullets out of the case without ruining them is only one of the reasons why every loader must have one of these tools. We’ll talk about that later on. As for now, let’s discuss the two bullet puller types.

  • Inertia Bullet Pullers

As the name states, this type of bullet pullers works through inertia and uses the bullet’s own weight to get it out of the case. While some of these tools come with a preset size to fit certain bullet sizes, other models come with collars of different sizes to adjust many calibers.

These pullers allow you to recycle every bit of component, although it does produce plenty of residues. For instance, once you get the bullet out, the powder comes out too. No need to worry, though; after picking up the bullet, you can collect the powder and reuse it for another purpose.

While using one of these, you must keep some considerations in mind. The bullet puller can leave damage on the bullet due to the momentum, and it happens more often if you’re working with pointed or soft-point bullets. To keep it from happening, place a cotton ball at the bottom of the tool.

  • Collet Bullet Pullers

With one of these bullet pullers, you may need other tools to get the job done. For example, you’ll need a reloading press and specific collets for some calibers. Unlike the previous type, which requires inertia to operate, the collet bullet pullers will grab the bullet to pull it out.

When is it time to have a collet bullet puller? Surely, when you’re planning to break a large amount of ammunition. These tools can work with presses of different types as well, which improves the quality of your performance.


What Type of Bullet Puller Should You Buy?

Choosing the type of bullet puller depends on the intensity of your reloading. There are two clear recommendations we can give you.

For demanding sessions where you have to work on more than ten cases, having a collet puller would be the best choice for you. They are efficient and will save you a lot of time.

On the other hand, if you’re a casual reloader, the inertia bullet may be the one you need. It is as good as the collet puller, but it does require more time to get the job done. The good thing is that this bullet puller type has more adjustment settings.


Review of the Best Bullet Pullers

#1. Hornady 050095 Bullet Puller

Hornady cam lock bullet puller
Hornady cam lock bullet puller

Hornady is among the most reliable brands when it comes to reloading tools, and here’s another good product from the brand.

This bullet puller is not necessarily the fanciest out there, as it looks antiquated. However, it is a collet puller that works great with a reloading press.

Using this tool is quite simple; it features a lever arm, which you can use to lock the bullet in a steady position as you work on it.

While it is there, the bullet puller secures the cartridge, ready to clamp the tool onto the bullet as soon as you flip the lever.

Naturally, this bullet puller requires a specific collet to work on some calibers, which is why you need to purchase some before getting to work.

Why It Stands out to Us

Sure, this bullet puller looks like an ancient tool when compared to the others, and yet its capacity to successfully remove bullets from the case is outstanding. Ease of use, compatibility to work on different calibers once you have the right collet, and versatility are other highlighted features.

Who Benefits from Using This Tool

You want this tool because of how easy it is to operate it. With this bullet puller, you’ll be able to disassemble a considerable amount of ammunition in less time. It is, undoubtedly, the best pistol bullet puller out there.


  • Easy to use
  • Quiet
  • Doesn’t bugger up the bullets.
  • Allows you to dump the powder right from the case.
  • Don’t have to take anything apart to retrieve your components.


  • Requires a reloading press
  • It doesn’t work as good with cast bullets

 Bottom Line

When other bullet pullers aren’t capable of getting the job done, this option will offer a quick solution to disassemble several bullets in a breeze. It is not fancy, but it sure delivers the results we want.


#2. RCBS Pow’r Pull Kit

rcbs pow'r pull kit
Rcbs pow’r pull kit

Next, we’ll discuss an incredible inertia bullet puller that quickly pays itself. After testing it, this tool has proven to be an outstanding piece of reloading equipment.

There are three adjustable collets included, featuring metal material for their construction.

You can use them to remove many bullets both quickly and easily, regardless of their size.

Unlike the previous pick, this one actually works well with cast bullets. Although the metal collets are great, the plastic material used for the shaft and the handle is not that strong.

Why It Stands out to Us

What we like the most about this tool is the soft insert added for more cushioning. It is something we don’t see often, and it does deliver that extra support required to prevent damage on the bullets.

Who Benefits from Using This Tool

Any reloader looking for an innovative bullet puller would do well considering this tool. Its plastic construction may not be good, but the metal collets included, as well as the soft insert, provide a comfortable operation for you and the bullet pieces.


  • Soft insert included
  • Includes metal collets
  • Affordable


  • The plastic material used for the handle and shaft is not strong

 Bottom Line

This bullet puller seeks to offer innovative features for more protection, but it suffers from the plastic materials used to produce the tool. Either way, it is a good puller for most basic tasks.


#3. Lyman Magnum Inertia Bullet Puller

Lyman Magnum Inertia Bullet Puller
Lyman Magnum Inertia Bullet Puller

While removing bullets from the brass, we often put too much pressure over the piece, creating permanent damage over it.

This bullet puller comes to prevent those issues, as it will allow you to perform your reloading activities without any risk of ruining the bullet or the case.

As you can see, it is a hammer-shaped tool, similar to the one before and the next one. The head design makes it possible to work on different calibers, including tiny 5.7x28FN up to the large magnums. While using this tool, you will safely strip loaded rounds in a few moments.

Additionally, the package includes two collets that adapt to most bullet sizes. Furthermore, they are capable of expanding to get a better grip over the bullet. Also, thanks to the ergonomic handle, reloaders will have a comfortable grip on the tool as they do their tasks.

Why It Stands out to Us

The compact design of this tool allows us to work on many bullets during one single session. After a while, it gets tiring, but overall it is an outstanding bullet puller. Its capacity to adapt to several bullets regardless of their size makes it a reliable pick for every reloader.

Who Benefits from Using This Tool

Certainly, reloaders having to work on several bullets a day would benefit from having this tool. It is comfortable, adapts over most bullet sizes, and it traps the pieces through a couple of hits.


  • Portable and lightweight
  • Ergonomic handle for more comfort
  • Versatile head design


  • Fragile bullet puller

 Bottom Line

This bullet puller, although quite fragile, offers versatility to work on a variety of bullets requiring only a couple of hits. A comfortable handle, an adaptable head, and extra accessories are some of the reasons why you should consider it.


#4. Frankford Arsenal Quick-N-EZ Impact Bullet Puller

Frankford Arsenal Quick-N-EZ Impact Bullet Puller
Frankford Arsenal Quick-N-EZ Impact Bullet Puller

This bullet puller is a good-looking tool every reloader must have at their workshop.

The appealing blue polycarbonate material used for the plastic tube, as well as the aluminum shaft, guarantee a firm grip for you to do your tasks comfortably.

Besides the puller, the purchase includes three different collets and four O-rings. Using them is quite simple, albeit it requires plenty of effort to get the bullet from the brass sometimes.

It offers users the versatility to work with bullets from many calibers, including .22 Hornet.

Unlike most other bullet pullers, which require a reloading press to get the job done efficiently, this one will work well by itself, with no other tools needed. Also, since it is lightweight, moving it between places should be no problem.

Why It Stands out to Us

This bullet puller is available at an affordable price, and it delivers the results we expected. Created with durable materials, a fancy hammer-shape structure, and weighing 1.54 pounds, it is an ideal tool that works with both rimmed and rimless. It is easy to use as well, requiring stern whacks.

Who Benefits from Using This Tool

Reloaders in need of a portable and lightweight bullet puller would do well buying this tool. It is not perfect, as you’ll often find yourself having to snack it repeatedly over the bullet to get it moving. However, for its low price, it does meet most expectations.


  • It includes three different collars and four O-rings
  • Portable, lightweight design
  • Affordable


  • For bullets similar to 300.9 mm, you’ll have to smack the puller repeatedly
  • Plastic material is not as strong as the steel used in other picks

 Bottom Line

With this bullet puller, you’ll be able to perform plenty of reloading tasks. The plastic materials may not be as strong as the steel used in other models, but it is comfortable to use due to its lightweight.


Frequently Asked Questions

Here we have some of the most commonly asked queries regarding bullet pullers:

What is the bullet puller used for?

These tools remove bullets from their case, or cartridge, under a safe operation that doesn’t damage either of the pieces. The bullet falls in the hollow head as well as the powder for you to reuse it.

What bullet puller to get?

It depends on what you want to do. As you saw in our reviews, the hammer-shape structure of the tools in our 2 to 4 spots guarantee a comfortable operation throughout the reloading tasks.

Then again, more reasons define what the best bullet puller is, so refer back to the beginning of our article to know which type of tool you need.

Are bullet pullers easy to use?

Yes, they are. The bullet pullers come with a variety of accessories like collets, which will adapt to different calibers to get them out of their case without ruining them.

Are bullet pullers comfortable?

Some bullet pullers have an ergonomic design that will allow you to use the tool comfortably. Naturally, if you spend hours using it, you’ll get tired eventually. It all depends on the workload.

Do bullet pullers require other tools?

In some cases, you may use a reloading press, which will make the reloading process much easier and faster.


Final Verdict

With the right bullet puller, you can say goodbye to frustrating problems you used to have while disassembling the bullets. These tools are efficient, comfortable, and easy to use.

Leave a Comment